
Add to Cart
polydioxanone suture hurricane thread lifting personal care pdo thread
PDO(Polydioxanone ):
1. Synthetic suture absorbable monofilament on violet color.
2. P-dioxanone polymer
3. Offers minimum tissue reactivity.
PM(Polypropylene):
1. Synthetic non-absorbable multifilament braided suture
2. Extruded in a filament with a computer controlled diameter
3. The tissue reaction is minimum.
4. The polypropylene in vivo is extraordinarily stable:ideal to fulfill it is purpose of being a permanent support without loosing its tensile strength.
Model
Mono | Needle Size (G) | Needle Length(mm) | Mono Screw | Needle Size (G) | Needle Length(mm) |
![]() | 29 | 25 | ![]() | 29 | 25 |
29 | 38 | 29 | 38 | ||
29 | 50 | 29 | 50 | ||
Tornado Screw | Needle Size (G) | Needle Length (mm) | Eye Thread | Needle Size (G) | Needle Length (mm) |
![]() | 26 | 30 | ![]() | 29 | 25 |
26 | 60 | 30 | 25 | ||
26 | 90 | 30 | 38 | ||
COG 3D L Needle | Needle Size (G) | Needle Length (mm) | COG 3D Blunt cannula | Needle Size (G) | Needle Length (mm) |
![]() | 19 | 38 | ![]() | 18 | 100 |
19 | 60 | 18 | 120 | ||
21 | 38 | 18 | 150 | ||
21 | 60 | 19 | 100 | ||
Multi Thread L Needle | Needle Size (G) | Needle Length (mm) | Nose Thread L Needle | Needle Size (G) | Needle Length (mm) |
![]() | 21 | 60 | ![]() | 19 | 38 |
23 | 38 | 19 | 60 | ||
23 | 50 | 21 | 60 | ||
Molding Thread-A Blunt cannula | Needle Size (G) | Needle Length (mm) | Molding Thread-B Blunt cannula | Needle Size (G) | Needle Length (mm) |
![]() | 18 | 100 | ![]() | 18 | 100 |
19 | 100 | ||||
Mesh Thread L Needle | Needle Size (G) | Needle Length (mm) | COG 4D/6D | Needle Size (G) | Needle Length (mm) |
![]() | 19 | 38 | Sharp needle | 23 | 60 ,80 ,90 ,100 |
L needle | 21 | 100 | |||
19 | 50 | Blunt cannula | 18 | 100 ,120 | |
19 | 70 ,100 ,120 | ||||
19 | 60 | 21 | 100 |
How to use.
1, Determine the number of thread and treatment area on the face.
2. Inject the Anesthetic on the treatment area.
3. Make punching with needle, insert the cannula and then pilfer the inner part of cannula.
4. Pull the thread out from the needle and Insert the thread(by taking direction the part of thread to be inserted first into the skin)
into the cannula which is put on the face. *(Use a cannula to make tunnel for the thread and insert the thread)
5. Pull out the inserted cannula after treatment done, as holding the end of Cog thread inserted into the face.
6. Press the treatment area in order to get well the thread stuck in the skin.
7. Make Sure thread does not come out from the skin and then, Cut off the remaining part of thread as holding tighten the thread of outside of skin
8. Press slightly up and down around the punctured skin.
TREATMENT AREAS:
reinforcement of the skin - face and body
rejuvenation of the skin
wrinkles correction
lips contouring
body shaping
eye area treatment